1962-1976 DODGE & PLYMOUTH
ENGINE FUEL PARTS

 

QUICK LINKS

Fast Idle Stop Solenoids

Fuel Vapor Separators

Throttle Cables & Components

Air Cleaner Accessories


Carb Choke Thermostats & Components

Remanufactured CARBURETORS

Choke Tubes & Components

Six Pack Intake Manifolds

Fuel Lines


Fuel Pumps

Fuel Filter Package

Fuel Line Clip Sets

 

THROTTLE CABLES

EG-179

70-74 E Body & 71-Up B Body

Big Block Four Barrel

$ 79.95

EG-191

70-74 E Body & 71-Up B Body

Small & Big Block Six Pack

$ 139.95

EG-3225

70-74 E Body & 71-Up B Body

Small Block Four Barrel

$ 139.95

EG-1322

68-70 A Body
*Discontinued part still in stock!

Small Block Four Barrel

$ 159.95

EG-3134

71-Up A Body
*Discontinued part still in stock!

Small Block Four Barrel

IN STOCK - CALL!

EG-4006SB

66 B Body 

273 Four Barrel

$ 139.95

EG-4006

66-67 B Body 

Big Block Four Barrel & 426 Hemi

$ 139.95

EG-8182 68-70 B Body
NOS Original Mopar Cable
426 Hemi
(2 - 4 BBL)
$ 189.95

MS-6160

67-70 B Body 

318 Four Barrel

$ 139.95

EG-293

68-70 B Body 

Big Block Four Barrel

$ 139.95

FW-337

68-69 Dart & Barracuda 

Big Block Four Barrel

$ 119.95

EG-187 Special applications needing extra long cable 29" from tip to tip  $ 99.95
EG-2778

70-71 Cuda & Challenger
(also will work on 72-74 non original Hemi's)

Hemi $ 149.95

 

 

CARBURETOR TO THROTTLE CABLE STUD
(for mounting accelerator cable & auto kickdown linkage & throttle return spring)

EG-1049

Auto Trans

2 or 4 Barrel

$ 34.95 ea.

EG-1023

Auto Trans

6 Pack

$ 34.95 ea.

EG-1048

Standard Trans

2 or 4 Barrel

DISC PART!
Limited supply still in stock!
CALL!

EG-1050

NUT for Throttle Cable Mounting Stud (special self locking nut that holds mounting stud on carb throttle shaft; appearance not exactly as original)

$ 23.95 ea.

EG-1050A

NUT for Throttle Cable Mounting Stud (special self locking, long shoulder nut that holds mounting stud on carb throttle shaft; appearance 100% exact as original)

$ 29.95 ea. 

EG-1051

CLIP for throttle mounting stud (holds throttle cable from coming off stud; clips on to above carburetor stud)

     

$ 12.95 ea.

EG-1051CL

CLIP for throttle cable (this is the very small round plastic plug/hold on clip that pushed into the end of the accelerator pedal and stops the cable from coming out of place)

$ 13.95 ea.

THROTTLE CABLE RETAINING CLIPS

Used to secure the throttle cable to the firewall.

HF-7155

HF-2725
(shows two different views on clip; Price only includes one clip, although two are suggested)
HF-7155 Fits 1967 and later with the round throttle cable housing $ 19.95
HF-2725 70-74 E-Body and 1971-74 B-body (this clip is bent over after inserting through the throttle cable mounting barb. Two clips should be used on original cables to prevent weak or stiff cable barbs from backing away from the firewall) $ 19.95 ea.

THROTTLE KICKDOWN LEVERS


EG-5413

EG-3725

EG-8835

EG-8592

EG-9334
EG-5413 65-70 B Body Big Block, 67-70 B Body Small Block & 70 B & E Body Small Block 2 BBL and Big Block $ 59.95
EG-3725 67-69 A Body Big Block $ 59.95
EG-8835 67-76 2 BBL, 68-76 4 BBL A Body Small Block & 70-71 B & E Body 340 4 BBL $ 59.95
EG-8592 66-67 426 Hemi $ 59.95
EG-9334 68-71 426 Hemi $ 59.95

 

 

HEMI CARB INTERCONNECTING ROD SWIVELS


HF-329

HF-396
HF-329 An excellent reproduction of the carburetor interconnecting rod swivel used on all 1966-71 426 Hemi rear carburetor applications.  Cadmium plated as original and includes correct zinc phosphate hex coni SEMS nut.  Reference Chrysler part number 2899 329. 1966-71 426 Hemi $ 29.95
HF-396

An excellent reproduction of the carburetor interconnecting rod swivel used on all 1966-71 426 Hemi front carburetor applications.  Cadmium plated as original and includes correct zinc phosphate hex coni SEMS nut.  Reference Chrysler part number 2899 396.

1966-71 426 Hemi $ 29.95

 

 

THROTTLE CABLE MOUNTING BRACKETS

EG-147 340 Six Pack - Auto or 4 Speed 

$ 64.95

EG-121

70-71 440 Six Pack - Auto or 4 Speed (for cars that use the 
1-piece rod from the throttle cable bracket to the transmission)

$ 69.95

EG-3815

69-70 440 Six Pack - Auto only (for cars that use the 2-piece rods from the throttle cable bracket to the transmission)

$ 59.95

EG-3814

66-71 426 Hemi - Auto or 4 Speed

$ 59.95

HF-0060

68-70 318/340/360  
4 BBL

$ 59.95

NEW!
EG-MS426C
426 Hemi Crossram Dual Quad

$ 84.95

HF-5884

1967-70 Big Block 
(two & four-barrel engines; will also fit earlier engines but is not exact replica of original part; Use for both 4-speed and automatic transmission applications -  remove pin and spacer for use with 4-speed)

$ 59.95

  HF-561 1972-1973 340 & 1974 360
B & E Body

(4 barrel engines)
$ 59.95
  HF-824 1971 383 (4 barrel engines) $ 59.95
  HF-826 1971-1972 440 B Body &
1970 440 C Body

(4 barrel engines)
$ 59.95
  HF-3703 1967-1970 383 A & B Body
(4 barrel engines)
$ 59.95

EG-729

TOP HOLD DOWN CLAMP for throttle cable mounting bracket (holds throttle cable to throttle cable mounting bracket)

$ 14.95 ea.

EG-4521

NUT for throttle cable bracket top hold down clamp (this is the nut that holds down the above hold down clamp)

$ 6.95 ea.

 

 

THROTTLE CABLE RETURN SPRING BRACKETS

EG-278

340 Six Pack

$ 24.95

EG-277

440 Six Pack

$ 24.95

HF-AX31

66-69 w/ 383/440 w/o AC

$ 28.00

HF-AX33

70-71 w/ 383/440 w/o AC

$ 29.95

HF-AX42

1968-70 340 4-Barrel

$ 29.95

EG-6759

66-71 Hemi w/ dual carbs

$ 39.95

HF-962

69-74 All Big Block with AC (bracket bolts to rear of RV2 AC compressor bracket)

$ 32.95

HF-452

67-68 All Big Block with AC

$ 32.95

EG-MS426D

426 Hemi Crossram Dual Quad

$ 49.95

Throttle Return Spring Bracket 

HF-736

1971-73 340/360 4-Barrel
(Used through April 1973)
$ 24.95 
Throttle Return Spring Bracket 

HF-538

1974-Up 318 & 360 2-Barrel $ 24.95 
Throttle Return Spring Bracket 

HF-465

1967-73 318/360 2-Barrel $ 24.95 
Throttle Return Spring Bracket 

HF-835

1964-66 Big Block A/C and Non-A/C $ 24.95 

 

 

THROTTLE RETURN SPRINGS

EG-4520

66-74 Small & Big Block w/ 2 BBL

$ 18.50 ea.

EG-807

67-76 Small & 66 & 69-76 Big Block

$ 18.00 ea.

EG-MS426B

426 Hemi Crossram Dual Quad

$ 54.95/set

Throttle Return Springs Throttle Return Spring Throttle Return Spring
EG-851 EG-857 HF-TS04
EG-851 66-71 Hemi - Auto (3 piece)

$ 39.95/set

EG-857 66-71 Hemi - 4 Speed (2 piece)

$ 39.95/set

HF-TS04

1967-1968 Big Block 4 BBL 
(Correct 49 coil, dk. green w/ orange accent stripe. Correct wire size, diameter, profiles and color as original part number 2899327. Powder coated.)

$ 19.95 ea.
Throttle Return Spring Throttle return Spring Throttle Return Spring
HF-TS03 HF-TS01 HF-TS02
HF-TS03 1967 Big Block (440) 4 BBL 
(Correct 55 coil, orange. Correct wire size, diameter, profiles and color as original part number 2806460. Powder coated.)
$ 19.95 ea.
HF-TS01 1970-1971 E Body & 1971-1972 B Body Big Block 4 BBL 
(Correct 33 coil, green. Correct wire size, diameter, profiles and color as original part number 3462753. Powder coated.)
$ 19.95 ea.
HF-TS02 Small Block 4 BBL 
(Correct 33 coil, red. Correct wire size, diameter, profiles and color as original. Powder coated.)
$19.95 ea.
Throttle Return Spring Throttle Return Spring Throttle Return Spring
HF-TS06 HF-TS07 HF-TS08
HF-TS06 340 & 440 Six Pack  
(Correct 16 coil, orange. Correct wire size, diameter, profiles and color as original part number 3462704. Powder coated.)
$ 19.95 ea.
HF-TS07 1969 Big Block 4 Barrel  
(Correct 45 coil, gray. Correct wire size, diameter, profiles and color as original part number 2951473. Powder coated.)
$ 19.95 ea.
HF-TS08 1970 B Body Big Block 4 Barrel. Also used on 1971 318 B, C & E Bodies.
(Correct 45 coil, gray. Correct wire size, diameter, profiles and color as original part number 3462752. Powder coated.)
$ 19.95 ea.
Throttle Return Spring     
HF-TS09    
HF-TS09 1971 340 Small Block 4 Barrel.
(Correct 33 coil violet metallic paint. end configurations & wire size)
$ 19.95 ea.

 

 

THROTTLE KICK DOWN LEVERS


HF-6266

HF-3794

HF-3718

HF-5413

HF-3725

HF-8592

HF-8835
   

EG-MS426A

426 Hemi Crossram Dual Quad (for use with Holley carbs)

$ 119.95 

HF-6266 Fits all automatic 1966-67 big blocks, 1967-69 big block A-Body, and all 426 Hemi applications. For use with the larger 5/16” rod end.  Includes pivot pin, flat washer, and retaining pin.  Reference Chrysler part numbers 2536266, 2658286, 6027983, and 120394. $ 59.95
HF-3794 Fits all automatic 1968-70 Big Block B & E-Body applications.  For use with the smaller 1/4” rod end. Includes pivot pin, flat washer, and retaining pin. Reference Chrysler part numbers 2843794, 2658286, 6027983, and 120394. $ 59.95
HF-3718 Fits all automatic 1968-73 340 A-Body and 1970 340 4-barrel E-Body applications. Includes pivot pin, flat washer, and retaining pin.  Reference Chrysler part numbers 2863718, 2658286, 6027983, and 120394. $ 49.95
HF-5413 Fits all automatic 1966-70 B-Body Big Block, 1967-70 B-Body Small Block, 1970 E-Body Big Block and 318 2-barrel, 1965-68 C-Body Big Block, and 1967-68 C-Body Small Block applications. Includes the correct washer and hairpin clip.  Reference Chrysler part number 2465413. $ 39.95
HF-3725 Fits all automatic 1967-69 A-Body Big Block applications. Includes the correct washer and hairpin clip.  Reference Chrysler part number 2863725. $ 39.95
HF-8592 Fits all automatic 1966-67 426 Hemi applications. Includes the correct washer and hairpin clip.  Reference Chrysler part number 2780592. $ 39.95
HF-8835 1967-76 2-barrel & 1968-76 4-barrel A-Body Small Block, 1970-71 E-Body 340 4-barrel, and 1971 B-Body 340 4-barrel applications. Includes the correct washer and hairpin clip.  Reference Chrysler part number 2780835. $ 39.95
HF-9334 1968-71 426 Hemi applications. Includes the correct washer and hairpin clip.  Reference Chrysler part number 2899334. $ 39.95

 


HF-8744

THROTTLE KICKDOWN ROD CONNECTOR

An excellent reproduction of the automatic transmission kickdown rod connector used on all 1965-66 B and C-Body applications, as well as all 1966-71 426 Hemi applications. Fabricated from the correct gauge steel, silver soldered together, and silver cadmium plated for original appearance.  Return spring hole is properly chamfered and tube is threaded in 5/16-24UNF.  Reference Chrysler part number 2468744.

HF-8744

1965-66 B and C-Body and 1966-71 426 Hemi

$ 34.95

 

AIR CLEANER ACCESSORIES

Click here to see our full line of Air Cleaner Assemblies
     

HF-286

Carter AVS AIR CLEANER STUD (5" long carb to air cleaner stud with correct length formed 1/4-20 UNC thread on each end; black phosphate finish) - Can be used on all air cleaners for 68-71 Carter AVS applications 

$ 14.95 ea.

HF-286H

Carter AFB AIR CLEANER STUD (3-3/4" long carb to air cleaner stud with correct length formed 1/4-20 UNC thread on each end; black phosphate finish) - Used on air cleaners for 66-71 Carter AFB 426 Hemi applications, and 69-1/2 lift off hood 440 Six Pack applications

$ 14.95 ea.

HF-286-6

HOLLEY SIX PACK AIR CLEANER STUD (correct length formed 1/4-20 UNC thread on each end; black phosphate finish) - Used on air cleaners for 70 and later 340 & 440 Holley Six Pack air cleaner applications 

$ 14.95 ea.

     

AC-066

Base Gaskets for Six Pack Air Cleaner 

$ 19.95/set of 3

WS-795

Air Cleaner Lid to Base GASKET (2 required)

$ 19.95 ea.

AC-6399

Stud & Wing Nut Kit for 4 BBL air cleaners 

$ 24.95 ea.

AC-6399

Stud & Wing Nut Kit for 6 BBL air cleaners (2 required)

$ 12.95 ea.

AC-6399

Stud & Wing Nut Kit for Hemi air cleaners (2 required)

$ 12.95 ea.

 
AV-12690 


MS-1882

 

AC-2628

Breather Hose (from valve cover breather cap to rear of air cleaner) 

$ 23.95 ea.

AV-12690

HOSE CLAMP (original style clamp for above hose; black color

$ 12.95 ea.

MS-1882

Oval shaped thick metal CLAMP (used to support & adjust the shaker base plate to the very outer shaker adaptor ring that the scoop sits on; Set of 7)

$ 27.95/set


FW-523C
   

FW-523C

AIR CLEANER WING NUT (this concours correct stamped steel wing nut has the same zinc plating as the originals) - Fits all air cleaners 

$ 8.95 ea.

 

NOS AIR CLEANER VACUUM DIAPHRAGM

Mounts on the air cleaner snorkle. Actuates the flapper inside the snorkle.

 

NEW!
FU-781

Rare 1970-71 A/B/E Body 318/383/440 (with single or dual snorkle) without fresh air hood; 1972-73 A/B/E Body 318/340/360/400/440 (with single or dual snorkle) without fresh air hood. Top and bottom sides shown.

$ 159.95 ea.

 

 

AIR CLEANER BREATHER HOSE KITS

For cars with black steel air cleaners. Correct grooved hose and correct black clamps.

KQ-BH3

1966-1971 A/B/C/E Body fits all Small & Big Blocks & Hemi engines

$ 34.95/kit

 

SHAKER HOOD DRAIN
HOSE KIT


For cars with 70-71 Cuda/Challenger cars with Shaker hood. Go on the outside Shaker baseplate.


KQ-DH

KQ-DH

1970-1971 Cuda & Challenger cars with Shaker Hood

$ 49.95

 

 

CARB CHOKE THERMOSTATS


FU-3785

FU-3988
FU-3988

HF-653

FU-1293/FU-1294 
 FU-1293/FU-1294   

FU-3785

1968-69 340/383/440 4 BBL CARTER AVS

$ 89.95

FU-3988

1967 To 1971 383 & 440 4 BBL HOLLEY

$ 199.95

FU-3433

1970 340 4 BBL CARTER AVS

$ 89.95

FU-3432

1971-72 340 4 BBL CARTER THERMOQUAD

$ 199.95

FU-4353

1973 318 2 BBL CARTER

$ 149.95

FU-1294

1973 340 4 BBL CARTER THERMOQUAD

$ 189.95

FU-1293

1974 360 4 BBL CARTER THERMOQUAD

$ 189.95

FU-6667CS

1966-67 383/440 4 BBL CARTER AFB

$ 199.95

FU-725

340/383/440 SIX PACK

$ 159.95


FU-653
1970 383/440 and 1971 383/440 AVS 4-Barrel Choke Assembly

# 2951 653 choke assembly for 1970-71 383/440 and 1971 440 Carter AVS equipped cars.  Has the correct part number stamped on the choke housing.  Yellow zinc dichromate and zinc finished parts as original.  Includes carburetor attaching clip and two correct mounting screws.
$ 99.95

HF-2875
1971 340 Thermoquad Choke Assembly

Excellent reproduction; housing is made from correct gauge material, stamped with correct part number, then zinc dichromate plated as original. Includes choke rod clip and two correct 1/4-20UNC retaining bolts.
$ 69.95

HF-169
1972 340 Thermoquad Choke Assembly

Excellent reproduction; housing is made from correct gauge material, stamped with correct part number, then zinc dichromate plated as original. Includes choke rod clip and two correct 1/4-20UNC retaining bolts.
$ 69.95

 

 

CHOKE STAT COMPONENTS

FU-2548

CHOKE STAT CUP (this is the metal cup that fits into the intake manifold & houses the choke stat)

All 70-Up Small & Big Block engines

$ 99.95 ea.

 

CH-751

Choke Thermostat hold on CLIP - 1/8" - secures choke rod to air valve lever

2 & 4 BBL Carter & Holley including Six Pack (not used on Hemi) 

$ 13.95 ea.

FU-796

Choke Thermostat GASKET

 

$ 44.95 ea.

 

FW-HCR

Choke Stat Cover METAL RING (this is the metal ring with the three mounting holes that go over the black plastic choke stat cover)

66-70 426 Hemi engines

$ 49.95 ea.

 

FACTORY REMANUFACTURED CARBURETORS


CB-821201

These reconditioned carburetors have been rebuilt and specially metal etched by the factory to give that "brand new" appearance to the metal, unlike any local carburetor shop is able to do. All come with new choke pulloffs and have been tested at the factory.

All carburetors listed, are original equipment that has been remanufactured by the factory, and have the exact appearance as originals, although we cannot match list or carburetor numbers. 

The list below is just a sampling of the over 75 different models available from 64-76. Some of the models available are: Carter 2 BBLs; Holley 2 BBls; Carter AVS 4 BBLs; Carter AFB 4 BBLs; Holley 4 BBLs and Carter Thermoquad 4 BBL's. 

* $ 125.00 core charge applies to all Carter & Holley 4 BBL carbs.

Part Number

Year

Engine Size

Type Carb

Auto/Std

Price

CB-151033

64-67

383/
426W

Carter 4 BBL AFB

A/S

$ 549.95

CB-111034

67

440

Carter 4 BBL AFB

A/S

$ 549.95
CB-488721 68-69 340

Carter 4 BBL AVS

A/S $ 549.95

CB-143012

68-69

383

Holley 4 BBL (Model 4160)

A/S

$ 549.95

CB-111035

68-69

383

Carter 4 BBL AVS

A/S

$ 549.95

CB-331036

68-69

440

Carter 4 BBL AVS

A/S

$ 549.95

CB-143012

68-69

440

Holley 4 BBL (Model 4160)

A/S

$ 549.95

CB-821201

70

340

Carter 4 BBL AVS

A/S

$ 549.95

CB-681037

70

383

Carter 4 BBL AVS

A/S

$ 549.95

CB-563013

70-71

383

Holley 4 BBL (Model 4160)

A/S

$ 549.95

CB-653013

70

440

Holley 4 BBL (Model 4160)

A/S

$ 549.95

CB-961038

70-71

440

Carter 4 BBL AVS

A/S

$ 549.95

CB-121202

71

340

Carter 4 BBL Thermoquad

A/S

$ 599.95

CB-671039

71

383

Carter 4 BBL AVS

A/S

$ 549.95

 

Note: All Carter AFB carbs have 4-1/2" carb neck. All Holley & Carter AVS carbs have have 5-1/4" neck.

 

Click here for SIX PACK CARBURETORS

 

NEW CARTER AFB CARBS W/ CHRYSLER STYLE LINKAGE

CB-9606

600 CFM

Manual choke

Non-emission

Discontinued

CB-9636

625 CFM

Electric choke

Emission design

Discontinued

CB-9756

750 CFM

Manual choke

Non-emission

Discontinued

NEW HOLLEY CARBS

CB-1850

600 CFM

Universal, Vacuum Secondary

Manual Choke, Side hung float bowls & universal throttle lever

$ 279.95 ea.

CB-3310

750 CFM

Universal, Vacuum Secondary

 

$ 279.95 ea.

 

DISTRIBUTOR VACUUM HOSE KITS
Vacuum hose that goes from the bottom of the carburetor to the vacuum advance on the distributor. Correct ribbed hose as original. 

KQ-VH7

7 Ribs (3 ft kit)

$ 19.95/kit

KQ-VH9

9 Ribs (3 ft kit)

$ 19.95/kit

 

 

CARBURETOR COMPONENTS

PK-297

SECONDARY DIAPHRAGM (rubber piece only; fits front or rear carbs)

All Six Packs 

$ 59.95 ea.

 

PK-2570

Secondary diaphragm METAL HOUSING (this is the metal piece that houses the rubber diaphragm; fits front or rear carb)

All Six Packs 

$ 49.95 ea.

 

PK-2572

Secondary diaphragm housing SCREWS (attaches the diaphragm housing to the body of the carb; 4 screws per kit; 1 kit per diaphragm needed)

 

$ 24.95/kit

 

FU-3117

Holley Carb FUEL BOWL

All Six Packs (center carb only)

$ 59.95 ea.

HF-HBSK

HOLLEY FLOAT BOWL SCREW KIT (100% original in appearance with slotted head and zinc dichromate finish; kit includes 4 long and 8 short screws and gaskets, which cover all three carbs). *All the new six pack carbs come with hex head screws which are not correct in appearance. These screws give your carb the correct appearance! 

All 340 & 440 Six Packs

$ 44.95/kit

 

FU-3120

Holley Carb Fuel Bowl FLOAT

All Six Packs (outer carbs only)

$ 29.50 ea.

 

FU-3121

Holley Carb Fuel Bowl FLOAT

All Six Packs (center carb only)

$ 29.50 ea.

 

FL-207

THROTTLE LEVER ADAPTOR 

Needed when installing any Holley carb on Chrysler products

$ 44.95 ea.

 

FL-1084

Top of carb to air cleaner ROUND BASE GASKET

5-1/4" round; fits all Holley & Carter AFB carbs

$ 12.95 ea.

 

FL-4131

Top of carb to air cleaner ROUND BASE GASKET

4-1/2" round; fits Carter AFB carbs

$ 12.95 ea.

PK-160

Six Pack carb LINKAGE

$ 89.95 ea.

 

MG-2082

Carb to Air Cleaner ADAPTOR RING

Adapts 5-1/4" air cleaner base opening to 4-1/2" carb neck

$ 11.50 ea.

FW-440

Carb Fuel Inlet FITTING - Fits all Carter AFB, AVS, and Thermoquad models

Fits all Carter AFB Four Barrel carbs 

$ 29.95 ea.

 

FW-HCLS

426 Hemi Complete CARB LINKAGE SET (Complete carb linkage kit for both carbs. All the correct parts to connect the front and rear carb on inline Carter AFB carbs)

All 66-71 426 Hemi engines 

$ 149.00/kit

KQ-KIRED

Carb Idle Mixture CAPS - Big Block & Hemi - RED

Carter AVS & Holley carbs

$ 24.95/pr.

 

KQ-KIBLK

Carb Idle Mixture CAPS - Small Block  - BLACK

Carter AVS & Holley carbs

$ 24.95/pr.

 

 

CARBURETOR REBUILDING KITS
When ordering carburetor rebuilding kits, year of carb and carb number must be specified!!! (Carb number is usually stamped in the front base of carb; write numbers down exactly as they appear, including any spaces). 

These are complete major rebuilding kit, "not" just a gasket kit! Includes all hard parts including gaskets, needle & seats, seals, accelerator pump, o rings, power valve, etc. Kit will do either the center or outer carb for six pack. Vacuum diaphragms "not" included. 

FU-3786

66-71 426 Hemi Carter AFB

$ 79.95

FU-3787

67-Down All V8 w/ 4 barrel Carter AFB

$ 69.95

FU-3788

71-Up Carter Thermoquad

$ 69.95

FU-3789

Carter AVS

$ 69.95

PK-1172

68-71 Six Pack
(one kit does one carb)

$ 64.95

 


ED-2480

EDELBROCK SIX PACK INTAKE MANIFOLDS

These brand new Edelbrock aluminum intake manifolds are for use with original style Holley carbs.

ED-2470

383/400 engines

$ 599.95 ea.

 

CHOKE TUBE ASSEMBLIES

EG-1223

66-70 Hemi

UPPER CARB CHOKE TUBE w/ ASBESTOS COVERING

$ 34.95 ea.

EG-1224

66-70 Hemi

ASBESTOS COVERING for above

$ 24.95 ea.

EG-1225

66-70 Hemi

UPPER CHOKE TUBE only

$ 24.95 ea.

EG-1227

66-70 Hemi

LOWER CHOKE TUBE (from the bottom of the right hand exhaust manifold to the air cleaner base)

$ 29.95 ea.

EG-1226

66-70 Hemi

MANIFOLD TUBE (stainless steel; for right hand exhaust manifold; attaches to upper choke tube)

$ 29.95 ea.

EG-2700

66-70 Hemi

CHOKE TUBE ASSEMBLY (kit includes EG-1223, EG-1226 & EG-1227 above)

$ 79.95/set

 

426 HEMI HEAT TUBE COVER

This reproduction is made to exact specifications as the originals and feature correct lettering, etched index mark and are injection molded from ultra high temperature material.
* This also fits 1958-62 dual four barrel applications, as well as dealer installed dual fours from 1963-65.

426 Hemi Heat Tube Cover

FU-1930

1966-70 426 Hemi

Hemi Heat Tube Cover

$ 44.95

426 HEMI CHOKE COVER ASSEMBLY

This reproduction is made to exact specifications as the originals and feature correct lettering, etched index mark and are injection molded from ultra high temperature material. Correct zinc dichromate housing retainer and mounting screws included.  Can be installed on any Carter AFB piston housing to create a functional choke for your Hemi. Kit includes: choke baffle plate, housing gasket, choke coil plate assembly, piston housing cover, heat tube cover gasket, heat tube cover, housing retainer and three correct retainer screws (shown below)
* This also fits 1958-62 dual four barrel applications, as well as dealer installed dual fours from 1963-65.

 

426 Hemi Choke Assembly
Hemi Choke Cover Assembly shown assembled on rear housing (rear housing not included)

FU-1931

1966-70 426 Hemi

Hemi Choke Piston Cover Assembly

$ 109.95

Hemi Choke Cover Assembly
Contents of Hemi Choke Cover Assembly FU-1931

426 HEMI CHOKE HOUSING RETAINER KIT

Kit includes all of the hardware required to restore your Hemi choke assembly. Zinc dichromate housing retainer, stainless choke baffle plate, housing gasket, heat tube cover gasket, and correct mounting screws finish off the package. This is the most complete kit available!
* These choke parts also fit 1958-62 dual four barrel applications, as well as dealer installed dual fours from 1963-65. 

HF-1171

1966-70 426 Hemi

Hemi Choke Housing Retainer Kit

$ 29.95

 

 

HEMI CROSSRAM LINKAGE KITS
Includes bell crank, linkage rods, return springs, throttle cable bracket & return spring bracket. 

FW-98

For Holley Carb

$ 319.00/kit

FW-99

For Carter Carb

$ 229.00/kit

 

 

CHOKE CABLE ASSEMBLY

RP-4380

70-71 Cuda & Challenger 426 Hemi

Choke Cable & Handle Assembly (complete)

$ 89.95 ea.

 

FUEL PUMP TO CARB LINES

FL-3498

Two Barrel

318 1967 To 1972

2-piece set

$ 39.95 ea.

FL-3431

Four Barrel Thermoquad

400/440

2-Piece 

$ 38.00 ea.

FL-3432

Four Barrel Holley

383/440

1-piece

$ 38.00 ea.

FL-3433

Four Barrel AVS

440

2-piece set

$ 37.00/set

FL-3434

Four Barrel AVS

383

1-piece

$ 37.95 ea.

FL-3435

Four Barrel AVS

340

2-piece set

$ 37.95 ea.

FL-3436

Four Barrel Thermoquad

340

2-piece set

$ 34.95 ea.

FL-5497

Four Barrel Carter AFB

66-67 361/383/440

2-piece set

$ 37.95 ea.

FL-3437

Six Barrel

340/440

Upper section

$ 49.95 ea.

FL-3438

Six Barrel

340

Lower section

$ 37.95 ea.

FL-3439

Six Barrel

440

Lower section

$ 37.95 ea.

FL-3440

Six Barrel

340

Both upper & lower set

$ 64.95/set

FL-3441

Six Barrel

440

Both upper & lower set

$ 64.95/set

FL-3442

Hemi

66-67

5-piece & 1 tee

$ 129.95/set

FL-3443

Hemi

68-71

4-piece & 1 tee

$ 129.95/set

RS-CLP18

Fuel line RETAINER CLIP - All yr, make & models (pushes into frame) - 5/16"

$ 3.75 ea.

RS-CLP20

Fuel line RETAINER CLIP - All yr, make & models (pushes into frame) - 3/16"

$ 3.75 ea.

RS-CLP22

Fuel line RETAINER CLIP - All yr, make & models (pushes into frame) - 3/8"

$ 3.75 ea.

RS-CLP21 Fuel line RETAINER CLIP - All yr, make & models (pushes into frame) - 1/4"

$ 3.75 ea.

 

FL-3396

Fuel line S CLIP - All yr, make & models (holds fuel line & distributor rubber hose vacuum line together - 5/16" both ends)

$ 15.95 ea.

RS-CLP40 Fuel line S CLIP - All yr, make & models (holds 3/8" fuel line & 1/4" vapor line together)

$ 6.95 ea.

RS-CLP12 Fuel line S CLIP - All yr, make & models (holds 5/16" fuel line & 1/4" vapor line together)

$ 6.95 ea.

  RS-CLP11  Spring Clip - Black (5/16" X 5/16") 

$ 6.95 ea.

 

AV-12918

VACUUM LINE & T FITTING KIT - All six packs (includes t fitting & vacuum lines)

$ 14.95/kit

RS-CLP47 Fuel Line CLIP (double sided push in; 5/16" & 1/4") $ 3.95 ea.
RS-CLP48 Fuel Line CLIP (double sided push in; 3/8" & 1/4") $ 3.95 ea.
RS-CLP49 Fuel Line CLIP (double sided push in; 5/16" & 5/16") $ 3.95 ea.
RS-CLP39 J style push in CLIP (3/8") $ 3.95 ea.

 

 

FRONT TO REAR FUEL LINES

A BODY

 

 

Original Material

Stainless Steel

64-66

5/16" Main Line

RS-YGL6501

RS-YGL6501S

$ 59.00

$ 95.00

64-66

3/8" Main Line

RS-YGL6502

RS-YGL6502S

$ 59.00

$ 95.00

67-68

Dart 5/16" dia.

RS-YGL6701

RS-YGL6701S

$ 59.00

$ 95.00

67-68

Barracuda or Valiant 5/16" dia.

RS-YGL6702

RS-YGL6702S

$ 59.00

$ 95.00

67-68

Dart 3/8 dia. 

RS-YGL6703

RS-YGL6703S

$ 59.00

$ 95.00

67-68

Barracuda or Valiant 3/8" dia. 

RS-YGL6704

RS-YGL6704S

$ 59.00

$ 95.00

69-72

Dart 5/16" dia.

RS-YGL6901

RS-YGL6901S

$ 59.00

$ 95.00

69

69-72

69 Barracuda or

69-72 Valiant/Duster 5/16" dia.

RS-YGL6902

RS-YGL6902S

$ 59.00

$ 95.00

69-72

Dart 3/8" dia.

RS-YGL6903

RS-YGL6903S

$ 59.00

$ 95.00

69

69-72

69 Barracuda or

69-72 Valiant/Duster 3/8" dia.

RS-YGL6904

RS-YGL6904S

$ 59.00

$ 95.00

73

Dart & Dart Swinger 5/16" dia.

RS-YGL-7301

RS-YGL-7301S

$ 59.00

$ 95.00

73

Dart Sport, Duster, Valiant 5/16" dia.

RS-YGL7302

RS-YGL7302S

$ 59.00

$ 95.00

73

Dart & Dart Swinger 3/8" dia.

RS-YGL7303

RS-YGL7303S

$ 59.00

$ 95.00

73

Dart Sport, Duster, Valiant 3/8" dia.

RS-YGL7304

RS-YGL7304S

$ 59.00

$ 95.00

B BODY

62-63

All B Body 5/16" Main Line

RS-RGL6201

RS-RGL6201S

$ 69.00

$ 95.00

62-63

All B Body 3/8" Main Line

RS-RGL6202

RS-RGL6202S

$ 69.00

$ 95.00

64-65

All B Body 5/16" Main Line

RS-RGL6401

RS-RGL6401S

$ 69.00

$ 95.00

66-67

All B Body 5/16" Main Line

RS-RGL6601

RS-RGL6601S

$ 69.00

$ 95.00

66-67

All B Body 3/8" Main Line

RS-RGL6602

RS-RGL6602S

$ 69.00

$ 95.00

68-69

All B Body 5/16" Main Line

RS-RGL6801

RS-RGL6801S

$ 69.00

$ 95.00

68-69

All B Body 3/8" Main Line

RS-RGL6802

RS-RGL6802S

$ 69.00

$ 95.00

68-69

All B Body 1/4" Return Line

RS-RGL6803

RS-RGL6803S

$ 69.00

$ 95.00

70

All B Body 5/16" Main Line

RS-RGL7001

RS-RGL7001S

$ 69.00

$ 95.00

70

All B Body 3/8" Main Line

RS-RGL7002

RS-RGL7002S

$ 69.00

$ 95.00

70

All B Body 1/4" Return Line

RS-RGL7003

RS-RGL7003S

$ 69.00

$ 95.00

70

All B Body 5/16" ECS Vapor Line

RS-RGL7004

RS-RGL7004S

$ 69.00

$ 95.00

71

All B Body 5/16" Main Line

RS-RGL7101

RS-RGL7101S

$ 69.00

$ 95.00

71

All B Body 3/8" Main Line

RS-RGL7102

RS-RGL7102S

$ 69.00

$ 95.00

71

All B Body 1/4" Return Line

RS-RGL7103

RS-RGL7103S

$ 69.00

$ 95.00

71

All B Body 5/16" Vapor Line (2 pcs)

RS-RGL7104

RS-RGL7104S

$80.00

$ 125.00

71

Front of 5/16" Vapor Line

RS-RGL714A

RS-RGL714AS

$ 15.00

$ 20.00

72

All B Body 5/16" Main Line

RS-RGL7201

RS-RGL7201S

$ 69.00

$ 95.00

72

All B Body 3/8" Main Line

RS-RGL7202

RS-RGL7202S

$ 69.00

$ 95.00

72

All B Body 1/4" Return Line

RS-RGL7203

RS-RGL7203S

$ 69.00

$ 95.00

72

All B Body 5/16" Vapor Line (2 pcs)

RS-RGL7204

RS-RGL7204S

$ 69.00

$ 95.00

E BODY

70-74

Cuda 5/16" Main Fuel Line

RS-EGL7001

RS-EGL7001S

$ 59.00

$ 95.00

70-74

Challenger 5/16" Main Fuel Line

RS-EGL7002

RS-EGL7002S

$ 59.00

$ 95.00

70-74

Cuda 3/8" Main Fuel Line

RS-EGL7003

RS-EGL7003S

$ 59.00

$ 95.00

70-74

Challenger 3/8" Main Fuel Line

RS-EGL7004

RS-EGL7004S

$ 59.00

$ 95.00

70-71

Cuda 1/4" Return Line

RS-EGL7005

RS-EGL7005S

$ 59.00

$ 95.00

70-71

Challenger 1/4" Return Line

RS-EGL7006

RS-EGL7006S

$ 59.00

$ 95.00

70-72

Cuda 5/16" Vapor Return Line (2 pcs)

RS-EGL7007

RS-EGL7007S

$ 59.00

$ 95.00

70-72

Challenger 5/16" Vapor Return Line (2 pcs)

RS-EGL7008

RS-EGL7008S

$ 59.00

$ 95.00

70-74

Front of RS-EGL7007 & RS-EGL7008

RS-EGL7009

RS-EGL7009S

$ 20.00

$ 30.00

73-74

Cuda 1/4" Vapor Return Line

RS-EGL7307

RS-EGL7307S

$ 59.00

$ 95.00

73-74

Challenger 1/4" Vapor Return Line

RS-EGL7308

RS-EGL7308S

$ 59.00

$ 95.00

 

FUEL LINE CLIP SETS

RS-ACS011

67-72 All A Body

for 3/8" fuel line

$ 29.95

RS-ACS012

67-72 All A Body

for 5/16" fuel line

$ 29.95

RS-BCS011

66-70 All B Body

for 3/8" fuel line

$ 29.95

RS-BCS012

66-70 All B Body

for 5/16" fuel line

$ 29.95

RS-BCS015

66-70 All B Body

for 3/8" & 1/4" fuel line

$ 29.95

RS-ECS005

70-74 All E Body

for 5/16" & 5/16" fuel lines

$ 29.95

RS-ECS006

70-74 All E Body

for 3/8" & 5/16" fuel lines

$ 29.95

RS-ECS007

70-74 All E Body

for 3/8", 5/16" & 1/4" fuel lines

$ 29.95

RS-ECS008

70-74 All E Body

for 3/8" & 1/4" fuel lines

$ 29.95

RS-ECS009

70-74 All E Body

for 3/8" fuel lines

$ 29.95

RS-ECS010

70-74 All E Body

for 5/16" fuel lines

$ 29.95

 

 

FUEL & BRAKE LINE CLIP SHIELDS

FU-91375

70-74 E Body

Sold Out.

 

MECHANICAL TYPE FUEL PUMPS

FU-979

All Big Block & Hemi (provides Hemi fuel delivery rate)

$ 239.95 ea.

FU-1197

All Small Block (provides Hemi fuel delivery rate)

$ 149.95 ea.

FU-2081

67-74 440 HP engines (stock type)

$ 69.95 ea.

FU-6280

68-71 383 HP engines (stock type)

$ 59.95 ea.

FU-1929

67-72 Small Block engines (stock type)

$ 49.95 ea.

FU-5495

73-74 Small Block engines (stock type)

$ 49.95 ea.

FU-5496

62-74 All Slant 6/225 c.i. 6 Cylinder 

$ 49.95 ea.

CHROME PLATED FUEL PUMPS

EG-MG7711

All Year Small Blocks (high pressure)

$ 124.95 ea.

EG-MG7712

All Year Big Blocks (high pressure)

$ 124.95 ea.

FUEL PUMP COMPONENTS

 

FU-4519

Fuel pump special MOUNTING BOLTS (all engines)

$ 6.95 ea.

 

FU-1024

Fuel pump GASKET (all engines)

$ 10.95 ea.

 

FU-404

Chrome Fuel BLOCK OFF PLATE

$ 29.95 ea.

FU-1302

Fuel Pump PUSHROD (all Big Block & Hemi)

$ 54.95 ea.

FUEL PUMP DIAPHRAGM KIT

FU-888XD562   For P4007039AB & Stock Original Pumps 440 & Hemi $ 119.95

 

 

FUEL PUMP ECCENTRIC 
(bolts to camshaft; actuates fuel pump arm)

EG-1189

All Yr Small Block engines

$ 79.95 ea.

 

 

FUEL VAPOR SEPARATORS
This exact reproduction is the canister that separates the vapor and sends it back to the fuel tank via the vapor return line.

EG-6713

KQ-V4

KQ-V5

EG-6713

68-71 B & E Body 440 & 426 Hemi 

$ 69.95

KQ-V4

72 B Body 

$ 89.95

KQ-V5

73 B Body 440 & 74-75 B & C Body 440 

$ 99.95

 

 

Click here for KEYSTONE FUEL LINE CLAMPS

FUEL FILTER PACKAGES


FU-181

FU-181

All Make & Model (includes hose & 4 clamps; metal; no logo)

$ 29.95 ea. 

FU-181P

All Make & Model (includes hose & 4 clamps; plastic)

$ 19.95 ea.

   DATE CODED 5/16" FUEL FILTERS
Each filter has the correct year and day of year as specified below, and manufacturer code. Correct markings in the correct shade of blue as originals . Includes 2 pieces of 5/16" dia. 2" "lg. kv" hose and 4 keystone clamps. 

SELECT THE PART NUMBER FOR EITHER THE FACTORY STYLE OR THE MOPAR REPLACEMENT STYLE IN THE APPROPRIATE COLUMN. ALL DATE CODED FILTERS ARE PRICED THE SAME. 


Factory Style




Replacement Style

 

FACTORY STYLE

MOPAR REPLACEMENT STYLE

 

NEW!
May 1966

KQ-F1376

KQ-R1376

$ 39.95 ea. 

NEW!
August 1966

KQ-F2206

KQ-R2206

$ 39.95 ea. 

NEW!
December 1966

KQ-F3406

KQ-R3406

$ 39.95 ea. 

NEW!
July 1967

KQ-F2127

KQ-R2127

$ 39.95 ea. 

NEW!
April 1967

KQ-F1107

KQ-R1107

$ 39.95 ea. 

December 1967

KQ-F3317

KQ-R3317

$ 39.95 ea. 

April 1968

KQ-F1148

KQ-R1148

$ 49.95 ea. 

July 1968

KQ-F2028

KQ-R2028

$ 49.95 ea. 

December 1968

KQ-F3538

KQ-R3538

$ 49.95 ea. 

April 1969

KQ-F1219

KQ-R1219

$ 49.95 ea. 

August 1969

KQ-F2119

KQ-R2119

$ 49.95 ea. 

November 1969

KQ-F3119

KQ-R3119

$ 49.95 ea. 

April 1970

KQ-F1010

KQ-R1010

$ 49.95 ea. 

June 1970

KQ-F1560

KQ-R1560

$ 49.95 ea. 

December 1970

KQ-F3430

KQ-R3430

$ 49.95 ea. 

July 1971

KQ-F2121

KQ-R2121

$ 49.95 ea. 

October 1971

KQ-F3031

KQ-R3031

$ 49.95 ea. 

April 1972

KQ-F1002

KQ-R1002

$ 49.95 ea. 

October 1972

KQ-F3112

KQ-R3112

$ 49.95 ea. 

Each filter has the correct year and day of year as specified below, and manufacturer code. Correct markings as came on the originals in black. Includes 2 pieces of 5/16" dia. kv" hose and 4 corbin self tightening style hose clamps. 


April 1973

KQ-F1083

 

$ 33.95 ea. 

July 1973

KQ-F2003

 

$ 33.95 ea. 

November 1973

KQ-F3293

 

$ 33.95 ea. 

April 1974

KQ-F1124

 

$ 33.95 ea. 

July 1974

KQ-F2034

 

$ 33.95 ea. 

November 1974

KQ-F3344

 

$ 33.95 ea. 

NON-DATE CODED 5/16" FUEL FILTERS
Includes 2 pieces of 2" "kv" hose and 4 clamps. 

 

KQ-F312

KQ-R312

$ 34.95 ea. 

NON-DATE CODED 3/8" FUEL FILTERS
Includes 2 pieces of 2" "kv" hose and 4 clamps. 

 

KQ-F375

KQ-R375

$ 36.95 ea. 

PLASTIC FUEL FILTER
Includes 2 pieces of 2" "kv" hose and 4 clamps. Includes red logo. 

1960-1963

KQ-FP258

Discontinued

PLASTIC FUEL FILTER
Includes 2 pieces of 2" "kv" hose and 4 clamps. Includes blue logo. 

1963-1967 & 1968 Super Stock only

KQ-FP254

$ 49.95 ea. 

 

FAST IDLE STOP SOLENOIDS

These solenoids looks exactly as originals in appearance and stop pre-ignition after turning car off. Mounts on the intake manifold on the drivers side below the center carb. Mounting bracket included as pictured. Additional mounting brackets (needed on 340's & 426 Hemi's) sold below.

FU-151

All 1970-71 340/440 Six Pack & 426 Hemi engines

Call

FU-151A

All 1969 440 Six Pack engines

$ 349.95

 

 

SOLENOID BOLTS

Two mounting bolts needed to mount solenoid to manifold. 

FU-151BK

69 -71 440 Six Pack 

$ 4.95/pr.

 

 

SOLENOID NUT MOUNTING KIT

Two mounting nuts needed to mount solenoid to mounting bracket. 

FU-151NUT

70 340 Six Pack & 70-71 426 Hemi 

$ 4.95/pr.

 

 

SIX PACK IDLE SOLENOID SCREW & SPECIAL CLIP ON NUT

This is the screw on the center carb located on the left hand side of the throttle shaft. Special nut pushes onto the throttle shaft lever/bracket and screw studs into this nut for adjusting idle solenoid speed.

FU-151S

70 340 Six Pack & 70-71 426 Hemi

$ 64.95

 

 

IDLE SOLENOID BRACKETS

FU-3816

Idle Solenoid Bracket

70 TA/AAR (mounts above solenoid on 340 Six Pack cars)

$ 39.95 ea.

 

FU-MS428

Idle Solenoid Bracket

426 Hemi (this is the very small bracket that bolts to the carb and the idle solenoid bolts to; this is not the idle solenoid itself)

$ 69.95 ea.

 

FW-HSBS

Hemi Idle Solenoid Adjust Screw BRACKET 

426 Hemi (attaches to rear carb linkage)

$ 99.95 ea.

 

 

Can't find what you're looking for here? Try the Fuel Parts page!

 

Back to Engine Parts Page