MOPAR PERFORMANCE DRIVETRAIN PARTS

Jims Auto Parts Home Page

 

BILLET YOKE KITS

Billet Yoke Kits for use with 742 or 489 housing or Mopar Performance aluminum housing (P4876445). Kits include u-bolts and pinion nut.

P4510638 Axle Yoke — 10 Spline, 1.078" Bearing Cap, Aluminum Billet (8 3/4" Axles) $ 199.95
P4510655 Axle Yoke — 10 Spline, 1.125" Bearing Cap, Aluminum Billet (8 3/4" Axles) $ 269.95
P4510656 Axle Yoke — 10 Spline, 1.078" Bearing Cap, 4130 Chrome Moly Billet (8 3/4" Axles) $ 219.95
P4510657 Axle Yoke — 10 Spline, 1.125" Bearing Cap, 4130 Chrome Moly Billet (8 3/4" Axles) $ 219.95

 

 

SLIP YOKE KITS

Slip Yoke Kits for use with driveshaft kits or general service.

P5007409 Slip Yoke Kit — Type 7260 U-Joint, 26 Spline, 6.80" Long (A-904) $ 59.95
P5007410 Slip Yoke Kit — Type 7290 U-Joint, 26 Spline, 7.30" Long (A-904)
Same part available under P/N TR-814...click here to view
Discontinued
P5007411 Slip Yoke Kit — Type 7290 U-Joint, 30 Spline, 8.00" Long (A-727)
Same part available under P/N TR-904LG...click here to view
Discontinued

 

 

UNIVERSAL JOINT PACKAGES

U-joint for driveshaft use.

P3690773 Universal U-Bolt Assembly Package — 1330 Series

$ 79.95

P5007418 Universal Joint Package — Adapts 7260 Driveshaft to 7290 Axle Yoke

$ 69.95

 

 

AXLE YOKE KITS

Complete driveshaft pinion yoke kits include yoke, U-joint retaining straps, strap hold-down bolts, yoke retaining washer and nut and instructions.

P5007417AD Axle Yoke Kit — 29 Spline, 7260 Joint (8 1/4" and 8 3/4" Axles) $ 189.95
P4529483AB Axle Yoke Kit — 29 Spline, 7290 Joint (8 3/4" Axles) $ 169.95
P4876804 Axle Yoke Kit — 10 Spline, 7290 Joint (Dana 60 Axles) $ 239.95

 

 

U JOINT & PROP SHAFT ASSEMBLY KIT

For custom fabrication of prop shafts. Kit includes the following: Front (7290) yoke and 3 1/4" 16 gauge tube assembly (58.20" in length); U-Joints (2); Balance weights — 2 of each (0.26 oz., 0.36 oz., 0.50 oz., 0.75 oz., and 1.00 oz.).

P4876886 Large Yoke U-Joint —7290 Joint (1971-00 8 1/4", 1962-74 8 3/4" and 1962-74 9 1/4" Axles)

$ 249.95

 

 

U-JOINT U-BOLT SERVICE PACKAGE

Services U-Bolt Conversion Kit. 2 required.

P3690774  U-Joint U-Bolt Service Package (Dana 60 Axles)

$ 12.95

 

 

U-JOINT STRAP & BOLT PACKAGE

This inexpensive package will help you avoid potential driveshaft failure and give you peace of mind. Use with Dana 60 Axle Yoke Kit (P4876804).

P4120468  7260 U-Joint Strap and Bolt Package (8 1/4" and 8 3/4" Axles) $ 44.95
P4120469 7290 U-Joint Strap and Bolt Package (8 3/4" and Dana 60 Axles) $ 44.95

 

 

ALUMINUM CARRIER HOUSING 

Housing is designed to reduce weight and hold up under high torque. It features a weight reduction of 44% (11 to 14 lbs.), compared to production and includes 6061 billet aluminum caps. It is stiffer than cast iron and decreases pinion deflection 10%.

P4876445 Aluminum Bare Housing (8 3/4" Axles) $ 1,099.95
P5007239  Housing Gasket (8 3/4" Axles) $ 14.95

Clearance required on 3.23 or higher ratios. Adjuster lock bolts may need to be replaced with socket head bolts.

 

RING AND PINION GEARS

These high-performance rear end Ring and Pinion Gears are manufactured with a special heat treat process. They are made with the special needs of drag race and off-road competition in mind.

P5249927AB Rear Axle Ring and Pinion Gears — 3.55:1 Ratio, 12-Bolt Cover (9 1/4"Axles) $ 239.95

 

 

AXLE BRACE

Axle Brace keeps axle tubes from twisting under extreme loads and provides strength and rigidness to the Chrysler 8 3/4" axles. Welding required.

P4510642 Axle Brace (8 3/4" Axles)

$ 109.95

 

 

DIFFERENTIAL CLUTCH KITS

O.E. clutch discs and plates to rebuild a limited slip differential.

 

P4529484 Differential Clutch Kit (8 3/4" Axles) $ 189.95
P4529485 Differential Clutch Kit (9 3/4" Axles) $ 189.95

 

 

REAR AXLE BEARING SET

This Rear Axle Bearing Set was specifically designed to eliminate the production bearing retainers and axle end play adjuster. Set contains two axle shaft bearings, two bearing retainer sleeves, two axle shaft seals and two axle flange gaskets.

P5249444 Rear Axle Bearing Set (1965 and Newer 8 3/4" and 9 3/4"Axles

$ 139.95

 

 

CRUSH SLEEVES

Original equipment crush sleeves for setting up rear axle. Includes pinion nut washer and pinion flange nut.

 

P4529700 Crush Sleeve (8 1/4" Axles) $ 69.95
P4529702 Crush Sleeve (9 1/4" Axles) $ 69.95

 

 

RING GEAR RETAINING BOLT PACKAGES 

Complete sets of (12) Ring Gear Retaining Bolts with instructions.

P4529486 Right-Hand-Thread Ring Gear Bolt Package (1971-on 7 1/4" and 8 3/4" Axles, 1972-on 8 1/4" Axles) $ 14.95
P5249163 Left-Hand-Thread Ring Gear Bolt Package (to 1970 
7 1/4" and 8 3/4" and to 1971 8 1/4" Axles)
$ 104.95

 

 

SURE-GRIP DIFFERENTIAL ASSEMBLIES

Mopar Performance supplies production replacement Sure-Grip Differential Assemblies for rear axles. These assemblies are complete for high-performance applications. Designed for gear ratios of 2.76:1 and higher.

P4529273 Sure-Grip Differential Assembly (to 1995 8 1/4" Axles) $ 399.95
P4876118 Sure-Grip Differential Assembly (8 3/4" Axles)  $ 899.95

 

 

RWD CHROME DIFFERENTIAL COVERS

Impress those behind you with one of these Chrome Differential Covers. Attaching bolts not included.

P3690753  RWD Chrome Differential Cover (8 1/4" Axles) $ 64.95
P3690754  RWD Chrome Differential Cover (1973 and Newer
9 1/4" Axles)
$ 64.95
P3690755 RWD Chrome Differential Cover (9 3/4" Dana 60 Axles) $ 59.95

 

 

REAR AXLE COVER CHROME ATTACHING BOLT SETS

Chrome Attaching Bolt packages for chrome rear axle covers.

P4452787  Chrome Attaching Bolts — Set of 12 (7 1/4", 8 1/4", 9 1/4" Axles) $ 29.95
P5249719  Chrome Attaching Bolts — Set of 9 (9 3/4" Dana Axles) $ 29.95

 

 

Back to the Jim's Mopar Performance Parts Home Page