Mopar Restoration Suspension Parts

SUSPENSION PARTS

Reproduction
SHOCK ABSORBERS

Reproduction of the factory HD shocks. Used 2 front and 2 rear per car.

SP-2130995631	1963-72 B Body & 1970-74 E Body	Front	$ 59.95 ea.
SP-2130995632	1963-72 B Body & 1970-74 E Body	Rear	$ 59.95 ea.

GAS CHARGED HIGH PERFORMANCE SHOCK ABSORBERS

These are direct replacement shocks and provide maximum performance. Improve handling, cornering and brake control. Sold individually.

*PERFORMANCE/DIRECT REPLACEMENT SHOCKS*
P4452124	All B & E Body - Rear (need 1 - P-1134 per shock for mounting, sold below; not included)	$ 32.95 ea.
P4452127	1965-72 A, B & E Body - Front *(need 1 - P-1134 per shock for mounting, sold below; not included)*	$ 32.95 ea.
P4452128	1963-76 A Body - Rear *(need 1 - P-1134 per shock for mounting, sold below; not included)*	$ 35.95 ea.
*DRAG RACING SHOCKS*
P4529514	All A Body - Rear w/ Automatic Transmissions	$ 39.95 ea.
P4529515	All B & E Body - Rear w/ Automatic Transmissions	$ 39.95 ea.
P4529516	All A Body - Rear w/ Manual Transmissions	$ 39.95 ea.

*SHOCK HARDWARE*
P-1134	Front Shock Hardware Kit (includes bushing, locknut & washer; 1 kit per shock needed)	All Year Make & Model	$ 18.95/kit
P-1134REAR	Rear Shock Hardware Kit (includes bushing, locknut & washer; 1 kit per shock needed)	All Year Make & Model	$ 13.95/kit
SP-1062	Front Shock Top Round WASHERS (2 required)	All Year Make & Model	$ 4.50 ea.
DI-1073	Rear Shock Round Steel WASHER (Inner)	All Year Make & Model	$ 3.00 ea.
DI-1074	Rear Shock Round Steel WASHER (Outer)	All Year Make & Model	$ 3.00 ea.
SP-1313	Lower Rear Shock Mounting NUT (self locking; goes on shock stud mounting plate; 2 per car required)	All Year Make & Model	$ 2.25 ea.
KQ-SMP	REAR UPPER SHOCK TOWER METAL PLUG (this exact repro flat, round plate w/ retainer, screw, and orange neoprene washer has exact plating. Located on the rear shock tower upper mounting hole through the trunk floor)	70 Cuda & Challenger	$ 7.50 ea.
FW-178	REAR UPPER SHOCK TOWER METAL PLUG (repro orange plug goes in the trunk floor and allows access to the top shock bolt; 1-7/8" dia.)	71-74 Cuda & Challenger	$ 5.50 ea.

FRONT SUSPENSION SEAL KITS
Kit includes 4 - tie rod end seals, 1 - pitman arm seal, 2 - lower ball joint seals, 2 - upper ball joint seals and either 1 or 2 idler arm seals (depending on the year make & model).
[1 kit per car needed]

SP-SS627	62-66 A Body	$ 109.95/kit
SP-SS6872A	67-72 A Body	$ 109.95/kit
SP-SS736A	73-76 A Body	$ 109.95/kit
SP-SS657B	65-67 B Body	$ 109.95/kit
SP-SS6872B	68-72 B Body	$ 109.95/kit
SP-SS739	73-79 B Body	$ 109.95/kit
SP-SS704E	70-74 E Body	$ 109.95/kit
SP-SSF	All F & M Body	$ 109.95/kit

POLYURETHANE K MEMBER MOUNTING KIT

Replaces those commonly dry rotted crossmember to frame rubber bushings. Improves front end handling. (1 kit needed per car)

SP-2688P

73-Up All B Body (Polyurethane isolator bushings only; no bolts or hardware included)

$ 149.95/kit

FRONT SUSPENSION REBUILD KITS

These front end rebuild kits include: two upper ball joints, two lower ball joints, upper and lower control arm bumpers, upper and lower control arm bushings, strut rod bushings and two outer tie rod ends.

SP-FRTEND7074E	70-74 CUDA & CHALLENGER (w/ either all four drum or disc & drum brakes)	$ 249.95/kit
SP-FRTEND6672B	66-72 ALL B BODY (w/ either all four drum or disc & drum brakes)	$ 249.95/kit
SP-FRTEND7376B	73-76 ALL B BODY (w/ either all four drum or disc & drum brakes)	$ 249.95/kit
SP-FRTEND6672ADI	66-72 ALL A BODY (w/ front disc brakes & rear drum brakes)	$ 269.95/kit
SP-FRTEND6672ADR	66-72 ALL A BODY (w/ all four drum brakes)	$ 319.95/kit
SP-FRTEND7376A	73-76 ALL A BODY (w/ either all four drum or disc & drum brakes)	$ 249.95/kit

FRONT SUSPENSION BUSHING PACKAGES

Replacement package contains upper and lower control arm bushings, end link bushings, strut rod bushings, adjusting cams, nuts and washers.

SP-FSB76	1962-72 A Body	$ 139.95
SP-FSB77	1973-76 A Body	$ 139.95
SP-FSB78	1962-65 B Body	$ 139.95
SP-FSB79	1966-72 B Body & 1970-72 E Body	$ 139.95
SP-FSB80	1973-74 B Body	$ 139.95
SP-FSB81	1975-79 B Body	$ 139.95
SP-FSB82	1973-74 E Body	$ 139.95
SP-FSB83	All F Body	$ 139.95

*ADDCO FRONT SWAY BARS* These kits include hardware for mounting & installation instructions.
SP-AD751	67-72 A Body (1-1/8" dia)	$ 129.00 ea.
SP-AD186	73-74 A & B Body (1" dia)	$ 129.00 ea.
SP-AD154	68-70 B Body (1-1/8" dia; curved in the middle)	$ 129.00 ea.
SP-AD150	68-70 B Body (1-1/8" dia; straight in the middle)	$ 129.00 ea.
SP-AD806	73-74 B Body (1" dia)	$ 129.00 ea.
SP-AD149	70-74 E Body (1" dia)	$ 129.00 ea.
*ADDCO REAR SWAY BARS* These kits include hardware for mounting & installation instructions.
SP-AD919	67-74 A Body & 68-74 B Body (3/4" dia)	$ 119.00 ea.
SP-AD261	70-74 E Body (3/4" dia)	$ 119.00 ea.
*FRONT SWAY BAR END LINK KITS*
SP-18062	66-72 A Body & 66-69 B Body (2 required)	$ 9.95 ea.
SP-18061	70-72 B Body & 70-74 E Body (2 required)	$ 9.95 ea.
*SWAY BAR COMPONENTS*
SP-603	Front & Rear Sway Bar End Link BUSHING PKG - 70-74 E Body (located at each "very end" of the sway bar; need 4 for front & 4 for rear)	$ 4.99 ea.
SP-603W	Front or Rear Sway Bar Bushing WASHER - 66-76 A, B & E Body	$ .75 ea.
SP-5241	Front Sway Bar BUSHINGS - 70-74 E Body & 70-72 All B Body (black; located "closest to the middle" of the sway bar and bolt to frame; has two metal brackets that wrap around them which are not included)	$ 18.95/pr.
SP-MR393	Front Sway Bar FRAME BUSHINGS (these frame bushings are made of polyurethane; look like original) - 66-69 B body (w/ 7/8" sway bar)	$ 16.95/pr.
SP-MR364	Front Sway Bar FRAME BUSHINGS (these frame bushings are made of polyurethane; look like original) - 66-69 B body (w/ 15/16" sway bar)	$ 16.95/pr.
SP-632	Front Sway Bar Bushing LINK BOLT - 70-74 E Body (Need 2)	$ 3.50 ea.
SP-604AB	Front Sway Bar Bushing LINK BOLT - 66-69 A & B Body (Need 2)	$ 32.95 ea.
HF-5992	Front Sway Bar Bushing LINK BOLT KIT - 70-up B Body & 70-74 E Body (Need 1 kit per car) (Each kit includes 8 urethane bushings, 8 special washers, 2 nuts, 2 special link bolts & 2 spacers)	$ 54.95/kit
SP-3230	Front Sway Bar Support Bracket Mounting BOLT (Need 4 per car)	$ 1.25 ea.
SP-1310	Front Sway Bar Support Bracket Mounting Bolt NUT (Need 4 per car)	$ 1.25 ea.
SP-604	Rear Sway Bar Bushing LINK BOLT - 70-74 E Body (special double threaded ends; bolt goes from sway bar to rear end mounting plate)	$ 32.95 ea.
SP-604KIT	Sway Bar Bushing LINK BOLT KIT - 1966-69 A & B Body FRONT & 70-74 E Body REAR (Need 1 kit per car) (Each kit includes 8 urethane bushings, 8 special washers, 2 special link bolts and 4 nuts)	$ 69.95/kit
P4349116	Urethane Sway Bar End Link BUSHINGS (Set of 8; set of 8 bushings will do 1 sway bar)	$ 23.95/set

HEAVY DUTY LEAF SPRINGS

These extra heavy duty original equipment leaf springs are designed for high performance "A, B & E" body vehicles. These springs are just like production springs, bias design, that were stock items on 1966-76 "B" bodies with 440 or 426 manual and automatic transmissions, and on 70-74 "E" bodies with 440 or 426 manual or automatics. These leaf springs will fit any "A, B or E" body regardless of engine size. Comes with front bushing installed in assembly.

MP-0268-9	67-76 A Body - Pair NEW!!!	$ 309.95/pr.
MP-2982-3	66-72 B Body - Pair	$ 249.95/pr.
MP-2988-9	73-74 B Body - Pair	$ 249.95/pr.
MP-2984-5	70-74 E Body - Pair	$ 249.95/pr.

*LEAF SPRING COMPONENTS*
FW-247A	Leaf Spring Hanger Bracket STUDS (these are the studs that hold the rear leaf spring front hanger bracket to the frame. (4 required per bracket; 8 per car)		$ 5.95 ea.
SP-LSC472	Leaf Spring CLAMP SET (includes the long and short clamps that wrap around the leaf springs; made of steel as original; 1" wide; plated to resist rust. Depending on the make & model may need 2 or 4 clamps. Check to be sure! Professional installation is recommended. [rubber insert between clamp & leaf spring not included; sold below]	All 66-74 Dodge & Plymouths	DISC
SP-LSC472R	RUBBER INSERT for above clamps (this is the rubber insert between the clamp above and the leaf spring) - All 66-74 Dodge & Plymouths		$ 8.95 ea.
ST-638A	Rear Spring FRONT BUSHING 66-74 All A, B & E Body (all engines exc. 440 & Hemi; 1 per spring needed) [2" o.d.] (OEM style)		$ 29.95 ea.
ST-638B	Rear Spring FRONT BUSHING 66-74 All A, B & E Body (all 440 & Hemi engines; 1 per spring needed) [1-1/2" o.d.] (Aftermarket polyurethane type replacement)		$ 37.95 ea.
ST-638C	SOLID Rear Spring FRONT BUSHING 66-74 All A, B & E Body (sold in pairs) [1-1/2" o.d.] (Improves spring reaction by cutting down on rubber deflection. Steel sleeve allows free movement of aluminum bushing. Designed for use with competition leaf springs)		$ 74.95/pr.
ST-825	CENTER BOLT & GUIDE PIN for Rear Leaf Springs (also holds leaf springs together)		$ 14.95 ea.
ST-1250	Rear Leaf Spring Front Mounting BOLT	All Make & Model	$ 8.00 ea.
ST-1250N	NUT (concours quality nut; for above ST-1250)		$ 9.95 ea.

REAREND U BOLTS

RE-634

REAREND U BOLTS w/ special locking nuts (7" U shaped bolts that hold the rearend to the leaf spring)

$ 69.95/set

LEAF SPRING REBUILD KITS
Includes the metal straps with rubber insulators, plastic interliners & zinc interliners. This product is of superior quality and originality.

KQ-LS1	1968-74 All Small Block/Big Block cars (except 440, 440-6 & Hemi)	$ 68.95/kit
KQ-LS2	1967-72 B Body (with 440, 440-6 & Hemi)	$ 92.95/kit
KQ-LS3	1970-71 E Body (with 440, 440-6 & Hemi)	$ 81.95/kit
*LEAF SPRING PLASTIC SPACERS (set of 6)*
KQ-ES14	1964-74 (count the number of spacers you need and order accordingly; these spacers are sold in sets of 6)*	$ 10.95/set of 6

REAR SPRING SHACKLE PACKAGES
Package comes with bushings, side plates and nuts.
(One shackle per package; need 2 packages per car)

P5249715	All A Body cars	$ 55.95 ea
P5249716	All B Body cars	$ 40.95 ea
ST-396	All E Body cars	$ 59.95 ea

REAR SPRING SHACKLE BUSHINGS
8 per package; enough to do both side shackles.

ST-6630	67-76 A Body	$ 44.95/pkg.
ST-6631	66-74 B Body & 70-74 E Body	$ 22.50/pkg.

TORSION BAR SETS

These torsion bars improve the suspension performance and increase cornering ability or weight transfer of your vehicle. Available in a variety of diameters for restoration, performance and racing. The A Body bars are 35.7" long. The B/E Body bars are 41.0" long. These sets bolt right into stock locations without modifications. (Sold as sets of 2)

A BODY CARS

P5249148	.810" dia. - Drag Racing	$ 299.95/pr.
P5249150	.890" dia. - Restoration for 383 cars, improved "A" Engine handling	$ 299.95/pr.
P5249151	.920" dia.- Performance Handling, Solo Racing	$ 299.95/pr.
P5249154	1.090" dia. - 1/4 or 1/2 mile Circle Track Racing	$ 149.95/pr.

B & E BODY CARS

P5249157	.920" dia. - Restoration for 440/Hemi cars, improved A Engine handling	62-72 B Body & 70-74 E Body	$ 199.95/pr.
P5249158	.960" dia. - Improved "B/RB/HEMI" Engine handling	62-72 B Body & 70-74 E Body	$ 199.95/pr.
*TORSION BAR COMPONENTS*
ST-615	GREASE SEAL for Torsion Bar (at rear of torsion bar; need 2 per car)		$ 6.50 ea.

TORSION BAR CLIP/SEAL SET

Includes two snap ring clips and seals for use when changing torsion bars.

P5249609	Lock/Seal Set for all A/B/E bodies	$ 27.95
P4876097	Clips Only	$ 6.99

Back to the Suspension & Drivetrain page

FRONT SUSPENSION SEAL KITS Kit includes 4 - tie rod end seals, 1 - pitman arm seal, 2 - lower ball joint seals, 2 - upper ball joint seals and either 1 or 2 idler arm seals (depending on the year make & model). [1 kit per car needed]

POLYURETHANE K MEMBER MOUNTING KIT

FRONT SUSPENSION REBUILD KITS

REAREND U BOLTS

FRONT SUSPENSION SEAL KITS
Kit includes 4 - tie rod end seals, 1 - pitman arm seal, 2 - lower ball joint seals, 2 - upper ball joint seals and either 1 or 2 idler arm seals (depending on the year make & model).
[1 kit per car needed]